![Drivers M3a780m](https://kumkoniak.com/14.jpg)
![Drivers M3a780m Drivers M3a780m](https://i2.wp.com/the620guy.com/wp-content/uploads/2016/04/20160421-Len_A63_89Y1256_M3A780M_A_II_X2_240_NO_IO_5.jpg)
The stable version is older than the beta version but more stable, so it is recommended for beginners who are not using the latest products.
![Drivers M3a780m Drivers M3a780m](https://ae01.alicdn.com/kf/HTB18p88aiYrK1Rjy0Fdq6ACvVXa1/For-Lenovo-M5600-M5650-M5690-M560E-M565E-M569E-M5103T-780G-M3A780M-Desktop-Motherboard-M3A760M-RS780-LM3.jpg)
Difference between Stable version and Beta Version: Beta version is the latest version, which gives priority to support for the latest products (the stable version may not be compatible with those yet), and has some of the latest optimized ,but experimental features.QT LIB is a plug-in to ensure that 64-bit software can exeuate normally on some computers with poor compatibility.SHARPCAP is also included in the pack, you can choose 32-bit or 64-bit to install.Don’t forget to check whether the software you are using is 32-bit or 64-bit and select the right SDKs. SDKs for Third-party Software: Just pick and install the corresponding SDK according to the software you want to use.Some computers come with the driver, but the computer without the driver may be failed of controling the filter wheel. It is recommended that both drivers should be installed if you have a filter wheel. The two sorts of Ascom CFW Drivers correspond to two methods of controling the filter wheel: USB control and camera serial control.Ascom driver, which is necessary for the camera used in Ascom (the latest version of Ascom is 6.6).So even if you won’t use EZCAP_QT for capturing, we suggest you install it. EZCAP_QT, which is developed by QHYCCD and can be used in QHY devices tests, and management of updates.WDM Broadcast Driver, which can provide a live signal to Obs and other live software, you can install it if you have such needs like opeing a live show.System Driver, which is necessary for the camera operation and must be installed.Otherwise the program will report an error. Since most of the contents of All-in-one package are plug-ins that support third-party software, the third-party capturing software that you want to use must be installed before the All-in-one package.*QHY268 12Bit High Speed mode support (Note: This mode needs to update the camera firmware 2022.8.8, and cooperate with the driver and SDK in the allinone package of this version) Note: to implement this function, you need to update both the driver and SDK in allinone package.This function is currently not supported QHY294MPro, but available in the next update. In single frame mode, if the readout fails or is delayed for more 60 seconds, the system will automatically determine it as timeout, then skip this frame and start the next one. *Fix the issue that the camera occasionally disconnects due to long-time use (usually tens of hours or more) caused by firmware hibernation of computers. *Fix the issue that the USB3.0 camera occasionally gets stuck when connected to USB2.0 interface when using some computer control.
![Drivers M3a780m](https://kumkoniak.com/14.jpg)